NonStop S-Series Hardware Installation and FastPath Guide (G06.27+)

Contents

HP NonStop S-Series Hardware Installation and FastPath Guide—540460-001

E. FastPath Tasks: Required (continued)

13. Connect Ethernet Switch to Group 01 E-18

14. Connect Primary System Console to Ethernet Switch E-19

15. Install Tape Drive E-19

2. Start the System E-22

1. Prepare for System Startup E-22

2. Power On External System Devices E-23

3. Connect AC Power Cords E-24

4. Apply Power to Server E-26

5. Verify Topology E-27

6. Verify System Components E-28

7. Start System E-28

3. Verify the System E-30

1. Verify Components E-30

2. Verify Critical System Processes E-31

3. Verify Disk Drives E-31

4. Verify Tape Drive E-32

5. Verify Firmware E-32

6. Verify State of the Internal ServerNet Fabric E-32

4. Configure the System E-33

1. Configure Passwords E-34

2. Configure Kernel-Managed Swap Files E-35

3. Configure OSM or TSM Environment E-36

4. Configure System Attributes E-37

5. Configure DSM/SCM E-41

5. Install the Backup System Console E-45

F. FastPath Tasks: Optional

1. Prerequisites F-2

1a. Verify Required Configuration Changes F-2

1b. Review Initial System Configuration F-2

1c. Start Required Processes F-2

1d. Save Current System Configuration F-3

1e. If Your Server Will Be Part of a ServerNet Cluster F-3

2. Customize the System Configuration F-4

2a. Change SCF F-4

2b. Rename SCF Objects in the CONFIG File F-5

2c. Add SCF Objects to the CONFIG File F-6

3. Automate System Startup F-7