NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Cabling Enclosures
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
3-6
3. Connect ServerNet Cables
2. Connect and route the ServerNet cables between the enclosures and tighten the
thumbscrews.
3. Secure the cables to the cable supports using the cable ties, as shown in
Figure 3-3. Securing the cables means anchoring them to a cable tie anchor in the
cable supports. Cable ties are provided with the cables for the server.
Figure 3-3. Securing ServerNet Cables With Cable Ties
0
2
Cable
Channel
Cable Channel
0
1
Inner Cable-Tie
Anchor
ServerNet Cables
VST966.vsd
Cable Support
(1 of 2)
Cable Guidepost
(1 of 2)
Cable Tie