NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Installing External System Devices
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
7-15
Installing Fibre Channel Tape Devices Using an
IOAM Enclosure
Installing Fibre Channel Tape Devices Using an IOAM Enclosure
These Fibre Channel tape devices connect directly to the FCSAs in an IOAM
enclosure within a NonStop S-series system using fiber-optic cables.
Attaching a SCSI Tape Drive to the NonStop S-Series Server
To attach a tape drive to any PMF CRU or IOMF CRU:
1. Determine which PMF CRU or IOMF CRU should be connected to the tape drive.
2. Using the SCSI cable connector with the thumbscrews, plug the other end of the
SCSI cable into the differential SCSI port on the appropriate PMF CRU, IOMF
CRU, or IOMF 2 CRU.
Note. For more information about the IOAM enclosure, the Modular I/O Installation and
Configuration Guide is available to your service provider in NTL. For more information about
FCSAs, the Fibre Channel ServerNet Adapter Installation and Support Guide is available for
your service provider in NTL.
Product
Number Description Manual
M8501 HP Ultrium 960 LTO Fibre Channel
ACL tape drive, rack-mounted
M8501 and M8502 ACL Installation and
User’s Guide
M8502 HP Ultrium 960 LTO Fibre Channel
ACL tape drive, tabletop
M8501 and M8502 ACL Installation and
User’s Guide
M8503 800 GB HP Ultrium 3 LTO Fibre
Channel tape drive in L700 tape
library
L700 (CTL700) Installation and User’s
Guide
M8504 HP Ultrium Fibre Channel tape
drive in SL500 tape library
SL500 (M852x) Tape Library Installation
and User’s Guide
M8505 HP Ultrium 960 LTO Fibre Channel
tabletop tape drive
M8505 Tabletop Installation and User’s
Guide
Note. You can also connect the Virtual TapeServer in this way. See the Virtual TapeServer
Installion Guide.
To Determine the Configuration of ... See ...
Components that are factory configured The SCF configuration file
($SYSTEM.ZSYSCONF.SCF0000)
printout shipped with your server
A system that has been started or
components that have been installed and
configured
SCF Reference Manual for G-Series
RVUs