NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Powering On and Starting the System
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
8-14
Verifying Topology and System Components
Verifying Topology and System Components
Before you start the system, use the OSM or TSM Low-Level Link to verify that the
topology for the system has been set correctly and that system components are
present with the correct attributes:
1. Log on to the OSM or TSM Low-Level Link.
The Low-Level Link window and Log On to Low-Level Link dialog box appear.
2. In the Log On to Low-Level Link dialog box:
a. In the system list, select the system \NONAME.
b. Enter root as the user name, with no password.
c. Click Log on.
3. On the toolbar, click System Discovery.
When system discovery finishes, the Management window appears as shown in
Figure 8-6.
4. Resize the Management window so that its tree, view, and details panes are fully
visible. Resize the view pane so that the group 01 enclosure (GRP-1) is visible.
Note. To verify IOAM enclosure components, you must use the OSM Low-Level Link.