NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Powering On and Starting the System
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
8-20
Loading the System
If one or more of the startup event stream windows or startup TACL windows does
not launch on the system console after a few minutes, you must connect to MSP 1
within each window. This step is described in the NonStop S-Series Operations
Guide.
4. Monitor the system startup process. Messages indicating the progress and
completion of the system load, as well as the reload of processors indicated in the
CIIN file, appear in these display locations on the system console:
5. When the system load is complete (the operating system is loaded successfully
into the memory of processor 0 or processor 1), the System Status box on the
System Startup dialog box displays:
SYSTEM STARTUP COMPLETE, NSK RUNNING ON PROCESSOR n
•
If nothing appears in any of the startup event stream windows and startup
TACL windows, you must connect to MSP 1 within each window. For
instructions, see the NonStop S-Series Operations Guide.
•
If the system load fails, look for halt codes or messages displayed in the
System Startup dialog box or related events in the OSM or TSM Event Viewer.
For recovery procedures, see the Processor Halt Codes Manual or Operator
Messages Manual and contact your service provider.
•
If no messages appear in the Detailed Status box, the system load has
probably failed.
•
After the operating system is running on the server, messages are no longer
sent to the System Status box. See the event messages sent to the startup
event stream window.
•
To correct abnormal LED states on enclosures and CRUs, see Troubleshooting
Abnormal LED States on page 8-12.
Display Location Message Type
System Status box on the System Startup
dialog box
Initial high-level messages that are not
logged
Detailed Status box on the System Startup
dialog box
Low-level messages that you can save to
a file
Startup event stream windows Startup event stream messages
Startup TACL windows Startup messages