NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Performing Post-Startup Tasks
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
9-2
Check Power Supplies
Check Power Supplies
Ensure that all power supplies are functioning properly: perform the Redundant Power
Scrub action in the OSM Service Connection or TSM Service Application for all Module
objects in the system.
Check System Enclosure Components
These tests provide a quick check that all system components are operating.
Use the OSM Service Connection or TSM Service Application to perform these tests.
Do not use the OSM or TSM Low-Level Link for these tests because enclosures and
system components that need service are not labeled with color-coded icons.
1. Log on to the OSM Service Connection or TSM Service Application.
2. Resize the Management window so that its tree, view, and details panes are fully
visible.
3. Resize the view pane so that the group 01 enclosure (GRP-1) is fully visible.
4. Verify that no yellow or red triangular or arrow-shaped icons appear over the group
diagrams in the view pane. Yellow triangle icons indicate that operator intervention
is required.
Figure 9-1 on page 9-3 shows the OSM Management Window.
Figure 9-2 on page 9-4 shows the TSM Management Window.