NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Configuring the System
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
10-15
Secure Operations LAN Configuration
Secure Operations LAN Configuration
A secure operations LAN:
•
Connects servers to system consoles using Ethernet ports
•
Can include many clients, servers, routers, and bridges
•
Provides extra flexibility in locating system consoles
•
Allows system consoles outside the dedicated service LAN to access the server
•
Is used only by the OSM Service Connection, the TSM Service Application, and
the OSM or TSM Event Viewer.
Construct a Secure Operations LAN Configuration
You can connect system consoles to a secure operations LAN if the following
conditions are true:
To connect system consoles to a secure operations LAN, use the server’s E4SA,
FESA, or GESA ports.
Caution. System consoles that act as a primary or backup system console must connect to a
dedicated service LAN. See Section 6, Connecting a System Console
.
If you are using OSM If you are using TSM
Your server is running the G06.08 or later
RVU.
Your server is running the G06.04 or later
RVU.
You have installed SPR T7945AAG or later.