NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Creating Startup and Shutdown Files

HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002

13-20

Printer Line Shutdown File

This example shows an SCF command file that stops the printer line associated with

the SWAN concentrator $ZZWAN.#S01 (configuration track-ID X001XX).

This file can be invoked automatically from the STOPSYS file, or you can invoke it by

using the following TACL command:

> SCF/ IN $SYSTEM.SHUTDOWN.SDNLP, OUT $ZHOME /

== This is $SYSTEM.SHUTDOWN.SDNLP

== Shuts down the printer associated with the SWAN concentrator

== $ZZWAN.#S01

ALLOW 20 ERRORS

ABORT LINE $LP5516

Expand-Over-IP Line Shutdown File

This example shows an SCF command file that stops the Expand-over-IP

communications line from \Case1, a NonStop S7000 server, to \Case2, a NonStop

K-series server.

This file can be invoked automatically from the STOPSYS file, or you can invoke it by

using the following TACL command:

> SCF/ IN $SYSTEM.SHUTDOWN.IP2CASE2, OUT $ZHOME /

== This is $SYSTEM.SHUTDOWN.IP2CASE2

ABORT LINE $Case2IP

Direct-Connect Line Shutdown File

This example shows an SCF command file that stops the direct-connect line on a

SWAN concentrator.

This file can be invoked automatically from the STOPSYS file, or you can invoke it by

using the following TACL command:

> SCF/ IN $SYSTEM.SHUTDOWN.STOPLH, OUT $ZHOME /

== This is $SYSTEM.SHUTDOWN.STOPLH

== This shuts down the direct-connect line

ALLOW 20 ERRORS

ABORT LINE $Case2elh