NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Case Study: Installing and Configuring a System
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
14-22
Installing the System
Installing the System
The installers at Developers Inc. installed the system as it was shipped from the
factory. They also changed the system name and number, and changed other parts of
the system configuration. The examples in Customizing the Configuration, following,
show examples of command files that Developers Inc. can use to build a custom
configuration.
Customizing the Configuration
The following subsections contain examples of adding various objects to the
configuration database. All examples add and start the objects.
These examples assume that the E4SAs and SWAN concentrators were not added at
the factory. For your configuration, disks, tapes, ServerNet adapters, and SWAN
concentrators and other processes are configured at the factory. For a description of
the initial configuration files, see the NonStop S-Series Planning and Configuration
Guide.
The startup and shutdown files, used to start and stop this system in an orderly
manner, are described in Section 13, Creating Startup and Shutdown Files.
Note. Beginning with the G06.13 RVU, you do not need to add the WANBOOT, SNMPTMUX,
TFTPSERV processes. These processes are automatically added and started when the SWAN
concentrators are configured at the factory.