NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Case Study: Installing and Configuring a System

HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002

14-30

Adding an ATP6100 Line

This example contains an SCF command file that adds an ATP6100 line associated

with the SWAN concentrator $ZZWAN.#S01 (configuration track-ID X001XX) to the

configuration database. This line can be used to connect an asynchronous terminal

that uses the RS-232 interface. It also contains a startup file.

== This is $SYSTEM.STARTUP.ADDATP

== This file should be invoked after ADDMGR,

== and ADDSWAN.

== Add and start an ATP6100 device

allow 20 errors

ADD PROFILE $ZZWAN.#prof6530, FILE $SYSTEM.sys00.PATP6530

ADD DEVICE $ZZWAN.#atpp1, &

CPU 0, &

ALTCPU 1, &

PROFILE prof6530, &

IOPOBJECT $system.sys00.oatpcss, &

TYPE (53,00), &

RECSIZE 150, &

CLIP 2, &

LINE 1, &

ADAPTER s01, &

PATH A

START DEVICE $ZZWAN.#S01

== To enable data communications, you must start the lines using

== the command START LINE $atpp1 or by invoking a startup file that

== contains this command.

== To start a process, such as a TACL process, on this line

== specify $ATPP1.#TERM.