NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

ServerNet Cabling
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
B-14
Small Tetra 8 Systems
Small Tetra 8 Systems
This subsection provides ServerNet cabling tables and diagrams for selected small
Tetra 8 configurations. These configurations range in size up to six processor
enclosures and six I/O enclosures.
About This Information
•
You do not have to conform to one of these enclosure configurations. They are
merely examples. The number of possible enclosure arrangements for all systems
is too great to provide tables and diagrams for all.
•
Wherever a SEB is identified, an MSEB can also appear.
•
Installation requires four types of connections:
Configuration Page
About This Information
B-14
Tetra 8 Systems With One Processor Enclosure B-15
One Processor Enclosure, One I/O Enclosure B-15
One Processor Enclosure, Two I/O Enclosures B-15
Tetra 8 Systems With Two Processor Enclosures B-16
Two Processor Enclosures, One I/O Enclosure B-16
Two Processor Enclosures, Two I/O Enclosures B-16
Tetra 8 Systems With Three Processor Enclosures B-17
Three Processor Enclosures, One I/O Enclosure B-17
Three Processor Enclosures, Two I/O Enclosures B-18
Three Processor Enclosures, Three I/O Enclosures B-18
Three Processor Enclosures, Six I/O Enclosures B-20
Tetra 8 Systems With Four Processor Enclosures B-21
Four Processor Enclosures, One I/O Enclosure B-21
Four Processor Enclosures, Two I/O Enclosures B-22
Four Processor Enclosures, Three I/O Enclosures B-22
Four Processor Enclosures, Four I/O Enclosures B-23
Connection Information Appears in ...
Groundstraps Section 2, Installing Enclosures
EPO cables Section 2, Installing Enclosures
ServerNet cables This appendix
Power-on cables This appendix