Manualshelf

NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

ManualsBrandsHP ManualsServerHP NonStop G-Series
341342343344345346347348349350
Troubleshooting
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
D-10
Starting the System
Starting the System
Startup Event Stream and Startup TACL Windows Do Not Appear
1. Log on to the OSM or TSM Low-Level Link.
2. From the File menu, select Start Terminal Emulator > For Startup TACL.
Two OutsideView windows appear, one on top of the other. If the TACL prompt
does not appear in one window, view the other with the Windows taskbar buttons.
3. From the File menu, select Start Terminal Emulator > For Event Streams.
Two OutsideView windows appear, one on top of the other. If the TACL prompt
does not appear in one window, view the other with the Windows taskbar buttons.
If any of the four startup windows do not appear after the previous steps:
1. Select Start > OutsideView > OutsideView. The OutsideView dialog box appears.
2. From the Session menu, select New. The New Session Properties dialog box
appears.
3. On the Session tab, in the Session Caption box, enter a session caption name,
such as Startup Events or Startup TACL.
4. Click IO Properties. The TCP/IP Properties dialog box appears.
5. Enter the IP address of MSP 1, a space, and the port number of the window type
(303 for the startup event stream window, 301 for the startup TACL window). For
example:
192.231.36.2 303 (startup event stream window)
192.231.36.3 303 (startup event stream window)
192.231.36.2 301 (startup TACL window)
192.231.36.3 301 (startup TACL window)
If your workstation is not authorized or is not in the access list in the TSM Low
Level Link, you will not receive such a list.
6. Click OK. You are returned to the New Session Properties dialog box.
7. Click OK. The startup event stream window or startup TACL window appears. A
TACL prompt appears in the startup TACL window.
With the OSM or TSM Event Viewer, look for important messages that might have
been logged to the EMS log during this procedure.
Topic Page
Startup Event Stream and Startup TACL Windows Do Not Appear
D-10
System Load Fails D-11
CIIN File Is Not Invoked During System Startup D-12
Reload Fails D-13