NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Required
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
E-5
1. Inventory Shipment
1b. Inventory Equipment
1. Verify that all equipment you ordered has arrived:
•
If you have a System Equipment Inventory Form, check off each piece of
equipment received.
•
If you do not have a System Equipment Inventory Form, compare the Product
List or the Box Inventory List to the equipment you have received.
2. Verify that all cables are the length you ordered.
3. Ensure that the other smaller containers contain the following:
4. Report any missing or damaged items to your service provider.
Note. Inventory the following equipment in later steps:
•
CRUs in enclosures: 5. Inventory and Inspect All Components on page E-11.
•
System consoles: 10. Install Primary System Console on page E-16.
•
Tape subsystem SCSI cables: 15. Install Tape Drive on page E-19.
! Item Quantity
Detachable AC
power cords
Two per enclosure
Groundstraps The number of enclosures minus one; none for one processor
enclosure with no I/O enclosures.
ServerNet cables Quantity varies with number of enclosures; none for one
processor enclosure with no I/O enclosures. Type varies with
plug-in cards (PICs) installed in PMF CRUs and IOMF CRUs.
Cable ties 12 per enclosure
EPO cables One per enclosure
Power-on cables One per enclosure
Emergency Power-Off (EPO) Cable
AC Power Cord
Power-On Cable
ServerNet ECL Cable
Groundstrap
Cable Tie
VST977.vsd