NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Introduction
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
1-9
Installation Overview
Shipping Packages
Each enclosure or stack of enclosures is shipped in a shipping package.
About Shipping Packages
The shipping package consists of protective cardboard panels on the top and sides of
the enclosure, secured with nylon banding straps that are 1.5 inches (3.75 mm) wide.
Equipment is included in your shipment so that you can unload the shipping packages
as follows:
•
Wooden pallets
Each shipping package comes equipped with a wooden pallet as shown in
Figure 1-1, The Shipping Package. This pallet includes skids spaced for forklift
handling.
•
The unloading ramp
°
The ramp allows you to unload the enclosure from the pallet without a forklift.
°
Only one unloading ramp is included in the shipment, regardless of the number
of enclosures shipped.
°
The ramp is attached to one shipping package with banding straps as shown in
Figure 1-1, The Shipping Package.
Note. For information about shipping packages for IOAM enclosures, including package
specifications and unpacking instructions, contact your HP trained service provider who can
refer to the Modular I/O Installation and Configuration Guide located in the NTL Hardware
Service and Maintenance Collection in the Support and Service Library.