NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Required
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
E-18
11. Create Emergency Repair Disk or Automated
System Recovery Disk
11. Create Emergency Repair Disk or Automated System
Recovery Disk
Much of your system configuration is saved to the Windows registry. If your Windows
system files become corrupted, an emergency repair disk or automated system
recovery disk can reconstruct them.
Use the backup procedure described in the Windows XP Professional documentation
shipped with your system console.
12. Install Ethernet Switch
Unpack and install Ethernet switch 1 using the documentation that came with the
switch.
13. Connect Ethernet Switch to Group 01
1. Connect any port (except the cascade port) on the switch to the Ethernet port on
the PMF CRU in group 01, slot 50.
2. Connect the switch to the Ethernet port on the PMF CRU in group 01, slot 55.
Figure E-15. Connecting an Ethernet Switch to Group 01
Ethernet Port
Network Interface
Card (NIC) on
System Console
Ethernet
Switch
Cascade Port
Ferrite Bead
RJ-45
Plug
VST519.vsd