NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)
FastPath Tasks: Required
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
E-34
1. Configure Passwords
1. Configure Passwords
1a. Configure Super ID and Null User Passwords
1. Log on to TACL using the super ID (255,255):
> logon super.super
> password: newpassword
2. Assign a password to the super ID (255,255):
> password newpassword
3. If you need the 0,0 (NULL.NULL) user ID, assign a password to it:
> logon null.null
> password newpassword
If you do not need the 0,0 (NULL.NULL) user ID, delete it:
> deluser null.null
1b. Configure Root User Password
1. Log on to the OSM or TSM Low-Level Link.
2. Complete a System Discovery.
3. From the File menu, select Add/Remove User IDs.
4. In the MSP Users dialog box:
a. Select the root user. (Predefined for the low-level link on new systems.)
b. Click Modify.
5. In the Change Low-Level Link Password dialog box:
a. Type a new password for the root user. Changing the password is strongly
recommended for security.
b. Type the new password again to confirm it.
c. Click Change.
6. Click OK.
7. Click OK.
8. In the MSP Users dialog box, click OK.
Task Page
1a. Configure Super ID and Null User Passwords
E-34
1b. Configure Root User Password E-34