NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
F-1
F FastPath Tasks: Optional
This appendix contains all optional configuration tasks for a two-processor or
four-processor NonStop S-series server in the Tetra 8 topology.
If your server contains more than four processors or must be configured in the Tetra 16
topology, do not use this appendix. See the rest of this manual.
Topic Page
1. Prerequisites
F-2
1a. Verify Required Configuration Changes F-2
1b. Review Initial System Configuration F-2
1c. Start Required Processes F-2
1d. Save Current System Configuration F-3
1e. If Your Server Will Be Part of a ServerNet Cluster F-3
2. Customize the System Configuration F-4
2a. Change SCF F-4
2b. Rename SCF Objects in the CONFIG File F-5
2c. Add SCF Objects to the CONFIG File F-6
3. Automate System Startup F-7
Modify Provided Startup Files F-7
Create Startup Files F-7
4. Automate System Shutdown F-8
Tips for Shutdown Files F-8
5. Configure a SWAN or SWAN 2 Concentrator F-9
Access the WAN Wizard Pro F-9
6. Configure an Expand-Over-IP Line F-10
Prerequisites F-11
1. On the NonStop S-Series Server F-12
2. On the NonStop K-Series Server F-16
3. On the NonStop S-Series Server F-18
4. On the NonStop K-Series Server F-19
5. On Either NonStop Server F-21
7. Install Software F-22
Configuring Software With DSM/SCM F-23
Installing a Software Product Revision (SPR) F-25