NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
F-3
1d. Save Current System Configuration
1d. Save Current System Configuration
Save the current system configuration (CONFIG) before making any changes. This
practice allows you to undo changes if necessary. If the most recent change results in
a problem, you can restore the previous system configuration by loading the system
from the saved system configuration file.
Save the current CONFIG file as follows:
1. List the saved configuration files. At the SCF prompt:
-> FUP INFO $SYSTEM.ZSYSCONF.CONF*
2. Save the current configuration using a unique file name. At the SCF prompt:
-> SAVE CONFIGURATION xx.yy
where xx.yy is a number in the range 0.0 through 99.99.
1e. If Your Server Will Be Part of a ServerNet Cluster
The NonStop ServerNet Cluster product connects multiple servers in a cluster (up to
24 servers using the star topologies and up to 64 servers using the layered topology)
and passes information from one server to any other server in the cluster. This product
extends the ServerNet fabrics outside the system boundary and allows the ServerNet
protocol to be used for intersystem messaging.
A ServerNet cluster consists of individual servers, each containing internal ServerNet
fabrics, connected through fiber-optic cables and cluster switches to other servers.
Only NonStop S-series servers can belong to a ServerNet cluster.
For information about configuring a server as part of a ServerNet cluster, see the
ServerNet Cluster Manual (for star topologies) or the ServerNet Cluster 6780 Planning
and Installation Guide (for layered topologies).