NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Optional

HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002

F-10

6. Configure an Expand-Over-IP Line

This section describes how to configure an Expand-over-IP connection to a network

through a NonStop K-series server.

To help you create an Expand connection quickly, this procedure describes how to

configure a single Expand-over-IP line with default configuration values. To customize

the Expand configuration described in this section, see the Expand Configuration and

Management Manual.

Topic Page

Prerequisites

F-11

NonStop S-Series Server F-11

NonStop K-Series Server F-11

1. On the NonStop S-Series Server F-12

1a. Save the Current Configuration F-12

1b. Configure $ZEXP F-12

1c. Configure $NCP F-13

1d. Obtain TCP/IP Information F-13

2. On the NonStop K-Series Server F-16

2a. Obtain TCP/IP Information F-16

3. On the NonStop S-Series Server F-18

3a. Configure and Start an Expand-Over-IP Line-Handler Process F-18

4. On the NonStop K-Series Server F-19

4a. Configure and Start an Expand-Over-IP Line-Handler Process F-19

5. On Either NonStop Server F-21

5a. Start the Expand-Over-IP Line F-21