NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
F-14
1. On the NonStop S-Series Server
To list all NonStop TCP/IP and TCP6SAM transport service providers:
> LISTDEV TCPIP
The following output shows both TCP6SAM and NonStop TCP/IP processes
because NonStop TCP/IP and NonStop TCP/IPv6 are both running on this system.
(Parallel Library TCP/IP and NonStop TCP/IPv6 cannot run on the same system.)
2. The NonStop TCP/IP, TCPSAM, or TCP6SAM process you select must have an
Ethernet subnet configured.
To list the subnets configured for a particular TCP/IP process:
-> INFO SUBNET $tcpip-process-name.*
Example F-3 shows an SCF INFO SUBNET display. Ethernet subnets are
identified by the word ETHERNET in the TYPE field.
3. Record the name of the NonStop TCP/IP, TCPSAM, or TCP6SAM process you
selected (shown in the Name field of the SCF LISTDEV display) in the
tcpip_process field in the SCF ADD DEVICE Command Worksheet on
page F-18.
4. Locate the first numbers in the PPID and BPID fields in the SCF LISTDEV display.
These are the primary and backup processor numbers for the NonStop TCP/IP,
TCPSAM, or TCP6SAM process. Record them in the cpunum and altcpunum
fields in the SCF ADD DEVICE Command Worksheet on page F-18.
5. Record the IP address of the subnet you want to use in the src_ipaddr field in
the SCF ADD DEVICE Command Worksheet on page F-18 and in the
dest_ipaddr field in the COUP Worksheet on page F-20.
Example F-2. SCF LISTDEV TCP6SAM Display
LDev Name PPID BPID Type RSize Pri Program
124 $ZTC02 0,301 1,287 (48,0) 32000 200 \MYSYS.$SYSTEM.SYS00.TCP6SAM
125 $ZTCP0 0,304 1,282 (48,0 ) 32000 200 \MYSYS.$SYSTEM.SYS00.TCPIP
129 $ZTCP1 1,285 0,308 (48,0 ) 32000 200 \MYSYS.$SYSTEM.SYS00.TCPIP
160 $ZTC21 2,292 3,276 (48,0 ) 32000 200 \MYSYS.$SYSTEM.SYS00.TCPIP
161 $ZTC01 0,313 1,292 (48,0 ) 32000 200 \MYSYS.$SYSTEM.SYS00.TCPIP
165 $ZTC03 0,316 1,293 (48,0 ) 32000 200 \MYSYS.$SYSTEM.SYS00.TCPIP
Example F-3. SCF INFO SUBNET Display
TCPIP Info SUBNET \MYSIS.$ZTC21.*
Name Devicename *IPADDRESS TYPE *SUBNETMASK SuName QIO *R
#LOOP0 \NOSYS.$NOIOP 127.0.0.1 LOOP-BACK %HFF000000 OFF N
#SN1 \MYSIS.LANX 172.16.35.16 ETHERNET %HFFFFFF00 ON N