NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
F-21
5. On Either NonStop Server
5. On Either NonStop Server
5a. Start the Expand-Over-IP Line
Start the Expand-over-IP line from either the NonStop S-series server or the NonStop
K-series server:
1. Start SCF at the TACL prompt:
-> SCF
2. Enter one of the following commands at the SCF prompt:
•
On the NonStop S-series server:
-> START LINE $sline
•
On the NonStop K-series server:
-> START LINE $kline
3. Exit SCF:
-> EXIT