NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

FastPath Tasks: Optional
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
F-27
Installing a Software Product Revision (SPR)
4. Create New Software Revision
1. In the Configuration Revisions window, select the configuration revision to be
updated.
2. Click New software revision.
A New Software Revision window appears, showing the products in the last
software revision that was built for the target.
3. In the New Software Revision window, edit the revision notes for the new revision:
a. Click Edit Revision Notes.
b. In the Revision Notes box, add a description of the changes.
c. Click OK.
4. In the Software in Archive window:
a. Select the SPR.
b. To add the SPR to the new revision, click Copy.
5. When the Confirmation dialog box appears, click Continue.
5. Build and Apply Configuration Revision
1. In New Software Revision window, click Build/Apply.
DSM/SCM displays the Build/Apply Request dialog box, which appears grayed out
for several minutes while DSM/SCM assembles the build information.
DSM/SCM assigns a name to the Build/Apply request.
2. In the Build/Apply Request dialog box:
a. Use the default values for the following options:
•
Output options
•
Target subvolume (TSV) locations
•
SYSGEN options
•
Include only changed files in the activation package
b. In the Activation SYSnn box, specify the SYS00 subvolume name.
c. Click Edit instructions.
d. Add any necessary instructions to the instructions provided by DSM/SCM.
e. Click OK.