NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Contents

HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002

iii

3. Cabling Enclosures

1. Connect Power-On Cables 3-1

2. Connect EPO Cables 3-4

3. Connect ServerNet Cables 3-5

4. Installing Service-Side Doors

5. Installing, Starting, and Testing a System Console

Unpacking and Assembling a System Console 5-2

Installation Quick Reference 5-2

Finding Documentation 5-2

Finding the Quick Setup Reference Card 5-2

Unpacking the System Console 5-2

Assembling the System Console 5-6

Starting and Testing a System Console 5-8

Powering On a System Console 5-8

Verifying Readiness 5-9

Final Setup Steps 5-9

Operational Considerations for OSM and TSM 5-10

Connecting Multiple System Consoles 5-11

System Console Function Keys 5-12

6. Connecting a System Console

The Dedicated Service LAN 6-2

Server Connection to a LAN 6-2

System Console Connection to a Dedicated Service LAN 6-3

System Console Connection to a Secure Operations LAN 6-4

Ethernet Cables

6-4

Ethernet Switch Ports

6-4

Installing Ferrite Cores 6-4

Installing the Ethernet Switch or Hub 6-5

Connect the Ethernet Switch or Hub to the Server 6-5

Connect the System Console to the Ethernet Switch or Hub 6-6

7. Installing External System Devices

Installing Tape Drives 7-1

Installing a 5175 Open-Reel Tape Subsystem 7-2

Installing a 519x Cartridge Tape Subsystem 7-8

Installing Other Tape Devices 7-12

Installing Fibre Channel Tape Devices Using an IOAM Enclosure 7-15