NonStop S-Series Hardware Installation and FastPath Guide (G06.29+)

Introduction
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-002
1-28
Installation Overview
Group, Module, and Slot Hierarchy for IOAM Enclosures
Hardware in an IOAM enclosure is organized according to a group, module, and slot
hierarchy:
To perform hardware operations on an IOAM enclosure, you must use OSM. TSM
does not support IOAM enclosures. To identify individual components within the IOAM
enclosure using OSM, you must be familiar with the organization and naming
conventions. For example, OSM displays the location of a fan in group 11, module 3,
slot 17 in this form:
Fan(11.3.17)
Term Definition
Group The IOAM enclosure and all the components within it. IOAM
enclosures are numbered in the same way as I/O enclosures.
Module One I/O adapter module (IOAM). There are two IOAMs in an
IOAM enclosure, numbered 2 and 3. Each IOAM contains:
•
One ServerNet switch board connected to a fabric. The
ServerNet switch board in module 2 is connected to the X
fabric, and the ServerNet switch board in module 3 is
connected to the Y fabric.
•
Two power supplies
•
Two fans
•
Up to five ServerNet adapters
Slot A physical space in the IOAM module in which a component
can be installed. Slot numbers are assigned for each module:
Slot Number Component
1, 2, 3, 4, 5 ServerNet adapter
14 ServerNet switch board
15 and 18 Power supplies
16 and 17 Fans