NonStop S-Series Operations Guide (G06.24+)

Monitoring EMS Event Messages

HP NonStop S-Series Operations Guide—522459-007

4-3

ViewPoint

problems. You can view events from any EMS formatted log files ($0, $ZLOG, or an

alternate collector), including event logs saved on the server.

To access the TSM Event Viewer, refer to Launching OSM and TSM Applications on

page 1-11. This guide does not describe using the TSM Event Viewer. For more

information, refer to online help for the TSM Event Viewer.

ViewPoint

Use the ViewPoint product to display event messages about current or past events

occurring anywhere in the network on a set of block-mode events screens. The

messages can be errors, failures, warnings, and requests for operator actions. The

events screens allow operators to monitor significant occurrences or problems in the

network as they occur. Critical events or events requiring immediate action are

highlighted.

This guide does not describe using the ViewPoint product. For more information, see

the ViewPoint Manual. In general, the ViewPoint Manual applies to both D-series

RVUs and G-series RVUs. However, some information might apply only to D-series

RVUs; for example, references to the Peripheral Utility Program (PUP).