NonStop S-Series Operations Guide (G06.24+)

Communications Subsystems: Monitoring and
Recovery
HP NonStop S-Series Operations Guide—522459-007
6-12
Monitoring Line-Handler Process Status
ATM Subsystem
The next command displays detailed status for the ATM subsystem manager process.
(The ATM subsystem manager process is defined as a generic process in the NonStop
Kernel.)
> SCF STATUS PROCESS $ZZKRN.#ZZATM, DETAIL
The system displays a listing similar to:
Monitoring Line-Handler Process Status
A line-handler process is a component of a data communications subsystem. It is an
I/O process that transmits and receives data on a communications line, either directly
or by communicating with another I/O process. This subsection explains how to
monitor the status of a line-handler process on your system or on another system in
your network to which you have remote access.
To check the status of a line-handler process on your system:
> SCF STATUS LINE $line
A listing similar to this example is sent to your home terminal:
This listing shows that the Expand line-handler process being monitored is up and
functioning normally.
1-> STATUS PROC $ZZKRN.#ZZATM,D
NONSTOP KERNEL - Detailed Status PROCESS \COCO.$ZZKRN.#ZZATM
Backup PID........ 0 , 21
Creation Time..... JAN 28,2000 09:13:31
Name.............. $ZZATM
OwnerID........... 255, 255
Primary PID....... 1 , 19
Priority.......... 180
State............. STARTED
Substate..........
1-> STATUS LINE $LHPLIN1
EXPAND Status LINE
Name State PPID BPID ConMgr-LDEV
$LHCS6S STARTED 1, 20 2,25 49