NonStop S-Series Operations Guide (G06.24+)

Disk Drives: Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-007
9-4
Monitoring the Status of Disk Drives Using SCF
2. To get more information about a specific disk, use the SCF STATUS DISK, DETAIL
command. For example:
-> STATUS DISK $DATA09, DETAIL
The output from this example shows that $DATA09 is stopped in the STOPPED
state, HARDDOWN substate.
3. For information on recovery operations, refer to Recovery Operations for a Down
Disk or Down Disk Path on page 9-13.
Examples
•
To display the summary status of the disk $DATA01:
-> STATUS $DATA01
•
To display the summary status of the mirror disk of the volume $DATA02:
-> STATUS $DATA02-M
65-> SCF STATUS DISK $DATA09, DETAIL
SCF - T9082G02 - (30JUN97) (14MAY97) - 11/05/98 13:24:10 System \SHARK
STORAGE - Detailed Status DISK \SHARK.$DATA09
Disk Path Information:
LDev Path Status State Substate Primary Backup
PID PID
92 PRIMARY INACTIVE STOPPED HARDDOWN 2,266 3,266
92 BACKUP INACTIVE STOPPED HARDDOWN 2,266 3,266
92 MIRROR INACTIVE STOPPED HARDDOWN 2,266 3,266
92 MIRROR-BACKUP INACTIVE STOPPED HARDDOWN 2,266 3,266
General Disk Information:
Device Type........... 3 Device Subtype........... 40
Primary Drive Type.... Mirror Drive Type........
Physical Record Size.. 4096 Priority................. 220
Library File..........
Program File.......... $SYSTEM.SYS00.TSYSDP2
Protection............ MIRRORED
Hardware Information:
Path Location Power Physical Status
(group,module,slot)
PRIMARY (2,1,1) DUAL PRESENT
MIRROR (2,1,2) NONE ABSENT
Total Errors = 0 Total Warnings = 0
34-> STATUS $DATA01
STORAGE - Status DISK \SHARK.$DATA01
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
63 *STARTED STARTED *STARTED STARTED 0,267 1,266
47-> STATUS DISK $DATA02-M
STORAGE - Status DISK \SHARK.$DATA02-M
LDev Path PathStatus State SubState Primary Backup
PID PID
62 MIRROR INACTIVE STOPPED HARDDOWN 0,268 1,265