NonStop S-Series Operations Guide (G06.24+)

Disk Drives: Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-007
9-6
Monitoring the Status of Disk Drives Using SCF
•
To display the detailed status of the disk $DATA01:
-> STATUS $DATA01, DETAIL
•
To display status of all paths for $DATA00:
-> STATUS DISK $DATA00-*
The output from this example indicates that $DATA00:
°
Is a mirrored volume (primary and mirror paths)
°
Has a mirror disk that is being revived (SubState REVIVE)
35-> STATUS $DATA01, DETAIL
STORAGE - Detailed Status DISK \SHARK.$DATA01
Disk Path Information:
LDev Path PathStatus State SubState Primary Backup
PID PID
63 PRIMARY ACTIVE STARTED 0,267 1,266
63 BACKUP INACTIVE STARTED 0,267 1,266
63 MIRROR ACTIVE STARTED 0,267 1,266
63 MIRROR-BACKUP INACTIVE STARTED 0,267 1,266
General Disk Information:
Device Type........... 3 Device Subtype........... 40
Primary Drive Type.... 4565-1 Mirror Drive Type........ 4565-1
Physical Record Size.. 4096 Priority................. 220
Library File..........
Program File.......... \SHARK.$SYSTEM.SYS00.TSYSDP2
Protection............ MIRRORED
Usage Information:
Capacity (MB)....... 2000.09 Free Space (MB).......... 290.76 (14.53%)
Free Extents........ 16 Largest Free Extent (MB). 172.42
Hardware Information:
Path Location Power Physical Status
(group,module,slot)
PRIMARY (1,1,3) DUAL PRESENT
MIRROR (1,1,4) DUAL PRESENT
STORAGE - Status DISK \ALM171.$DATA00-*
LDev Path PathStatus State SubState Primary Backup
PID PID
6 PRIMARY ACTIVE STARTED 0,10 1,10
6 BACKUP INACTIVE STARTED 0,10 1,10
6 MIRROR ACTIVE STARTING REVIVE 0,10 1,10
6 MIRROR-BACKUP INACTIVE STARTING REVIVE 0,10 1,10