NonStop S-Series Operations Guide (G06.24+)

Tape Drives: Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-007
10-11
Related Reading
b. Right-click the tape drive.
c. Select Actions from the menu. The Actions dialog box appears.
d. You can select up or down, which correspond to the SCF commands START
and STOP, or select various tests to perform on the tape drive.
For information on recovery operations, refer to the TSM online help or suggested
Repair Actions text (listed under Alarm Details) for specific tape-related alarms in the
TSM Service Application.
Related Reading
For more information about tapes and tape drives, refer to the documentation listed in
Table 10-2.
.
Table 10-2. Related Reading for Tapes and Tape Drives (page1of2)
For Information About... Refer to...
Operating tape drives:
5142 external digital audio tape
(DAT) drives
5142-xSE Rackmount Tape Subsystem User Guide
515x tape drives in a 9710
automated cartridge system
(ACS)
Addendum to the StorageTek 9710 for the Tandem
Environment
515x tape drives stand-alone 5157/5157 ACL S-Series Digital Linear Tape Subsystems
Installation/Users Guide
5158 ACL Digital Linear Tape Subsystem
Installation/Users Guide
5190 and 5194 tape drives 5190/5194 Modular Tape Subsystem Manual
5242 and 5242ACL tape drives DAT 72 (Models 5242 and 5242ACL Tape Drive User’s
Guide)
5257 tape drives 5257/5257ACL Installation and User’s Guide for Himalaya
S-Series Tape Enclosures
5258 tape drives 5258ACL Installation and User’s Guide
5259 tape drives 5259 L700 (CTL700) Installation and Operations Guide
9490 tape drives The documentation shipped with your tape drive
Performing system operations
involving tape drives
Guardian User’s Guide
Replacing tape drives CSSI Web
Recovery operations for
generic tape processes
SCF Reference Manual for the Kernel Subsystem
Recovery operations for tape
drives
SCF Reference Manual for the Storage Subsystem
TSM Online User Guide