NonStop S-Series Operations Guide (G06.24+)

Contents
HP NonStop S-Series Operations Guide—522459-007
v
10. Tape Drives: Monitoring and Recovery
Related Reading 9-16
10. Tape Drives: Monitoring and Recovery
When to Use This Section 10-1
Overview of Tape Drives 10-2
Monitoring Tape Drives 10-3
Monitoring Tape Drive Status 10-3
Monitoring the Status of Labeled-Tape Operations 10-9
Identifying Tape Drive Problems 10-9
Recovery Operations for Tape Drives 10-10
Recovery Operations Using SCF 10-10
Recovery Operations Using the OSM Service Connection 10-10
Recovery Operations Using the TSM Service Application 10-10
Related Reading 10-11
11. Processors: Monitoring and Recovery
When to Use This Section 11-1
Monitoring and Maintaining Processors 11-2
Monitoring Processor Status Using OSM or TSM 11-2
Monitoring Event Messages 11-3
Monitoring the State of PMF CRUs 11-3
Monitoring Processor Performance Using ViewSys 11-4
Identifying Processor Problems 11-5
Hardware Error Freezes 11-5
Processor Hangs 11-5
Processor Halts 11-5
Recovery Operations for Processors 11-6
Halting One or More Processors 11-7
Recovery Operations for a System Hang 11-7
Recovery Operations for a Hardware Error Freeze 11-8
Recovery Operations for an Unacceptable Service State 11-8
Recovery Operations for a Processor Halt 11-8
Dumping a Processor to Disk 11-10
Enabling or Disabling System Freeze 11-12
Enabling or Disabling Freeze on a Processor 11-13
Freezing the System or Processor 11-15
Dumping a Processor to Tape (Down System Only) 11-17
Dumping All Processors in a System 11-22
Reloading a Single Processor on a Running Server 11-23
Loading a Processor From Disk 11-24