NonStop S-Series Operations Guide (G06.27+)

Overview of Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-008
3-24
Using SCF to Locate the Problem
This partial listing shows some of the disk configuration information:
The output shows that the primary path is currently configured for the X fabric
($ZZSTO.#IOMF.GRP-31.MOD-1.SLOT-50), and the backup path is currently
configured for the Y fabric ($ZZSTO.#IOMF.GRP-31.MOD-1.SLOT-55). Next, you
check which path is currently active:
> SCF STATUS $D3101-*
STORAGE - Configuration Information Magnetic DISK \GATE8.$D3101
Common Disk Configuration Information:
Primary Path Information:
Adapter............................... $ZZSTO.#IOMF.GRP-31.MOD-1.SLOT-50
Disk Device ID........................ 4
Location (Group,Module,Slot).......... (31,1,1)
SAC Name..........................$ZZSTO.#IOMF.SAC-2.GRP-31.MOD-1.SLOT-50
SAC ID................................ 6
SAC Sub Device........................ 2
Backup Path Information:
Adapter............................... $ZZSTO.#IOMF.GRP-31.MOD-1.SLOT-55
Disk Device ID........................ 4
Location (Group,Module,Slot).......... (31,1,1)
SAC Name......................... $ZZSTO.#IOMF.SAC-2.GRP-31.MOD-1.SLOT-55
SAC ID................................ 7
SAC Sub Device........................ 2
Mirror Path Information:
Adapter............................... $ZZSTO.#IOMF.GRP-31.MOD-1.SLOT-55
Disk Device ID........................ 4
Location (Group,Module,Slot).......... (31,1,2)
SAC Name..........................$ZZSTO.#IOMF.SAC-1.GRP-31.MOD-1.SLOT-55
SAC ID................................ 7
SAC Sub Device........................ 1
Mirror Backup Path Information:
Adapter............................... $ZZSTO.#IOMF.GRP-31.MOD-1.SLOT-50
Disk Device ID........................ 4
Location (Group,Module,Slot).......... (31,1,2)
SAC Name..........................$ZZSTO.#IOMF.SAC-1.GRP-31.MOD-1.SLOT-50
SAC ID................................ 6
SAC Sub Device........................ 1