NonStop S-Series Operations Guide (G06.27+)

Processors: Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-008
11-18
Dumping a Processor to Tape (Down System Only)
Before You Begin
To prepare for a tape dump:
1. Log on to the OSM or TSM Low-Level Link.
2. On the toolbar, click Processor Status. The Processor Status dialog box
appears.
3. Write down the status message displayed in the Processor Status dialog box
(Figure 11-2) for the processor to be dumped. You will need this information when
you notify your system manager or service provider about this dump.
4. Halt all processors that are still running (that have the status “Executing NonStop
OS”) by performing these steps in the Processor Status dialog box:
a. Select all processors to be halted. To select processors, scroll down the list
and select a processor using the left mouse button. You can use the Shift key
to select multiple processors. However, they must be in numerical order. For
Figure 11-2. Processor Status Dialog Box
808CDT .CDD