NonStop S-Series Operations Guide (G06.27+)

Starting and Stopping the System
HP NonStop S-Series Operations Guide—522459-008
16-12
Troubleshooting and Recovery Operations When
Starting the System
Startup Event Stream and Startup TACL Windows Do Not
Appear
Although these windows would probably not appear during system startup, you can
use the OutsideView product to configure or open a startup event stream window or
startup TACL window. To open startup event stream windows and startup TACL
windows:
1. Log on to the OSM or TSM Low-Level Link. The Management window appears.
2. Select File>Start Terminal Emulator>For Startup TACL. (See Figure 16-2.)
3. Two OutsideView windows appear, but one launches on top of the other. If you do
not see the TACL prompt in one OutsideView window, check the other
OutsideView window by clicking the buttons on the Windows toolbar. (See
Figure 16-3.)
4. Select File>Start Terminal Emulator>For Event Streams.
5. Two OutsideView windows appear, but one launches on top of the other. If you do
not see the TACL prompt in one OutsideView window, you can check the other
OutsideView window (see Figure 16-3).
If any of the four windows do not appear using this method, you can also start them as
follows:
1. Select Start>OutsideView>OutsideView. The OutsideView dialog box appears.
Figure 16-2. Opening a Startup TACL Window
Figure 16-3. OutsideView Buttons on the Windows Toolbar
TIF719
VST813.vsd