NonStop S-Series Operations Guide (G06.29+)

Communications Subsystems: Monitoring and
Recovery
HP NonStop S-Series Operations Guide—522459-009
6-6
Monitoring the WAN Subsystem
4. The LIF provides an interface to the PIF. The LIF object corresponds to logical
processes that handle data transferred between the LAN and a system using the
ServerNet architecture. To monitor the status of a LIF:
> SCF STATUS LIF lif-name
A listing similar to this example is sent to your home terminal:
This example shows a detailed listing of the status of the LIF on $ZZLAN.L038:
> SCF STATUS LIF $ZZLAN.L038 , DETAIL
Monitoring the WAN Subsystem
This subsection describes how to obtain the status of SWAN concentrators, data
communications devices, processes, and CLIPs. For more information on the WAN
subsystem, see the WAN Subsystem Configuration and Management Manual.
Monitoring Status for a SWAN Concentrator
To display the current status for a SWAN concentrator:
> SCF STATUS ADAPTER $ZZWAN.#concentrator-name
The system displays a listing similar to:
->STATUS LIF $ZZLAN.L038
SLSA Status LIF
Name State Access State
$ZZLAN.L038 STARTED UP
->STATUS LIF $ZZLAN.L038 , DETAIL
SLSA Detailed Status LIF \SYS.$ZZLAN.L038
Access State............. UP
CPUs with Data Path...... ( 0 )
Potential Access CPUs.... ( 0, 1 )
State.................... STARTED
Trace Filename...........
Trace Status.............
-> status adapter $zzwan.#s01
WAN Manager STATUS ADAPTER for ADAPTER \TAHITI.$ZZWAN.#S01
STATE ...........STARTED
Number of clips, 3
Clip 1 status : CONFIGURED
Clip 2 status : CONFIGURED
Clip 3 status : CONFIGURED