NonStop S-Series Operations Guide (G06.29+)

Communications Subsystems: Monitoring and
Recovery
HP NonStop S-Series Operations Guide—522459-009
6-10
Monitoring Other Communications Subsystems
The system displays a listing similar to:
Monitoring NonStop TCP/IP Subnets
To obtain the status of a NonStop TCP/IP subnet:
> SCF STATUS SUBNET #SN2
The system displays a listing similar to:
Monitoring Other Communications Subsystems
Depending how your system is configured, you might need to monitor additional key
subsystems such as the ServerNet/FX adapter subsystem and the Asynchronous
Transfer Mode (ATM) subsystem. Examples of commands for these follow.
ServerNet/FX Adapter Subsystem
This command checks the status of a ServerNet/FX LBU object, the logical interface
associated with a ServerNet/FX adapter:
> SCF STATUS LBU $ZZFOX.#lbu-name
The system displays a listing similar to:
This status command includes the DETAIL option:
> SCF STATUS LBU $ZZFOX.#lbu-name, DETAIL
1-> Status Route $ZTCO.*
TCPIP Status ROUTE \SYSA.$ZTCO.*
Name Status RefCnt
#ROU11 STARTED 0
#ROU9 STARTED 0
#ROU12 STARTED 0
#ROU8 STARTED 1
#ROU3 STOPPED 0
1-> STATUS SUBNET #SN2
TCPIP Status SUBNET \SYSA.$ZTC0.*
Name Status
#LOOP0 STARTED
#EN1 STARTED
1-> STATUS LBU $ZZFOX.#Y
FOX Status LBU On \COMM
Name State Controller Type
$ZZFOX.#Y STARTED FXSA