NonStop S-Series Operations Guide (G06.29+)

ServerNet/DA: Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-009
7-2
Identifying Problems With the ServerNet/DA
Identifying Problems With the ServerNet/DA
When monitoring the ServerNet/DA using the OSM Service Connection or the TSM
Service Application, the Power State and the Subcomponent State of the
ServerNet/DA should indicate normal operation. Table 7-1 lists the possible states for
the ServerNet/DA.
Table 7-1. Power, Service, and Subcomponent States for the ServerNet/DA
State Description
Power State: Off The ServerNet/DA is not operational.
Power State: OK The ServerNet/DA is available and operational.
Power State:
Possible
Redundant Power
Problem
Possible problem exists with the backup power supply. (The power
supply might not be fault tolerant.)
Power State:
Redundant Power
Problem
The system cannot access the backup power supply. (The power
supply is not fault tolerant.)
Power State:
Unknown
One or more components of the ServerNet/DA are not operational.
Service State:
Attention
Required
The ServerNet/DA requires operator attention.
Service State: OK The ServerNet/DA is functioning normally and does not require
attention or service.
Service State:
Service Required
The ServerNet/DA has a problem that requires service.
Subcomponent
State: OK
The subcomponents of the ServerNet/DA are available and
operational.
Subcomponent
State: Problem
One or more subcomponents of the ServerNet/DA are not operational.