NonStop S-Series Operations Guide (G06.29+)

Tape Drives: Monitoring and Recovery
HP NonStop S-Series Operations Guide—522459-009
10-11
Related Reading
b. Right-click the tape drive.
c. Select Actions from the menu. The Actions dialog box appears.
d. You can select up or down, which correspond to the SCF commands START
and STOP, or select various tests to perform on the tape drive.
For information on recovery operations, refer to the TSM online help or suggested
Repair Actions text (listed under Alarm Details) for specific tape-related alarms in the
TSM Service Application.
Related Reading
For more information about tapes and tape drives, refer to the documentation listed in
Table 10-2.
.
Table 10-2. Related Reading for Tapes and Tape Drives
For Information About... Refer to...
Operating tape drives:
Performing system operations
involving tape drives
Guardian User’s Guide
Replacing tape drives NTL Support and Service Library
Recovery operations for
generic tape processes
SCF Reference Manual for the Kernel Subsystem
Recovery operations for tape
drives
SCF Reference Manual for the Storage Subsystem
TSM Online User Guide
Configuring tape drives SCF Reference Manual for the Storage Subsystem
Starting and stopping tape
drives
SCF Reference Manual for the Storage Subsystem
TSM Online User Guide
Using the MEDIACOM
utility
DSM/Tape Catalog User’s Guide
DSM/Tape Catalog Operator Interface (MEDIACOM)
Manual
Guardian User’s Guide
Using the BACKCOPY utility to
duplicate backup tapes
Guardian Disk and Tape Utilities Reference Manual
Using the BACKUP utility to
save a copy of disk files on
tape
Guardian Disk and Tape Utilities Reference Manual
Using the RESTORE utility to
copy saved tape files to disk
Guardian Disk and Tape Utilities Reference Manual