NonStop S-Series Operations Guide (G06.29+)

HP NonStop S-Series Operations Guide—522459-009
16-1
16
Starting and Stopping the System
When to Use This Section on page 16-2
Minimizing the Frequency of Planned Outages on page 16-2
Anticipating and Planning for Change on page 16-2
Performing a Change Online on page 16-3
Powering On the System on page 16-3
Before Powering On the System on page 16-3
System Power-On Procedure on page 16-4
Troubleshooting and Recovery Operations When Powering On the System on
page 16-4
Starting the System on page 16-6
The System Startup Dialog Box on page 16-6
The Load Processor-n From Disk Dialog Box on page 16-9
Troubleshooting and Recovery Operations When Starting the System on
page 16-11
Getting a Corrupt System Configuration File Analyzed on page 16-17
Starting Other System Components on page 16-17
Stopping the System on page 16-18
Alerts on page 16-18
Preparing to Stop the System on page 16-19
Procedure to Stop the System Using OSM or TSM on page 16-20
Powering Off the System on page 16-21
System Power-Off Procedure Using SCF on page 16-21
System Power-Off Procedures Using OSM or TSM
on page 16-21
Emergency Power-Off Procedure
on page 16-22
Recovery Operations for Stopping or Powering Off the System on page 16-22
Reducing Shutdown Time on page 16-23
Write Efficient Startup and Shutdown Command Files on page 16-23
Use Parallel Processing on page 16-24
Investigate Product-Specific Techniques on page 16-25
Related Reading on page 16-25