NonStop S-Series Operations Guide (G06.29+)

Starting and Stopping the System
HP NonStop S-Series Operations Guide—522459-009
16-10
The Load Processor-n From Disk Dialog Box
4. Select File>Start Terminal Emulator>For Event Streams.
Procedure to Use the Load Processor-n From Disk Dialog
Box
To perform a system load into a specified processor, perform these steps from the
OSM or TSM Low-Level Link:
1. From the toolbar, click Processor Status. The Processor Status dialog box
appears.
2. In the Processor Status dialog box:
a. Select the processor you want to load.
b. In the Processor Actions drop-down menu, scroll to Load.
c. Click Perform action. The Load Processor-n From Disk dialog box (see
Figure 16-1) appears, where n is the processor number of the processor you
selected.
Figure 16-1. Load Processor-n From Disk Dialog Box
805CDT .CDD