NonStop S-Series Operations Guide (G06.29+)

Tools and Utilities for Operations
HP NonStop S-Series Operations Guide—522459-009
B-7
TSM Notification Director
TSM Notification Director
The TSM Notification Director receives and displays notifications and incident reports
from NonStop S-series servers. If your system is configured for dial-out, you can
authorize an incident report to be forwarded to your service provider. The TSM
Notification Director also forwards information from NonStop S-series servers to the
TSM Low-Level Link and the TSM Service Application to ensure that these applications
display up-to-date information.
TSM Service Application
The TSM Service Application allows you to communicate with a NonStop S-series
server when the operating system is running. The TSM Service Application provides
you with the most complete view of the status of your NonStop S-series server and
allows you to perform many service operations. You can perform these tasks using the
TSM Service Application:
•
View a list of outstanding alarms
•
Power on or power off a disk
•
Perform an up or down action on a disk
•
Clear data on a disk
•
Update firmware on a group of service processors or a single service processor
•
Configure or update server information
The Management window of the TSM Service Application displays a tree pane, a view
pane, and a details pane:
•
The tree pane is located on the left side of the Management window and has two
tabs: the system tab (displaying the actual system name) and the Cluster tab. The
system tab depicts the NonStop S-series server and its groups, modules, and
resources in a hierarchy. From the Cluster tab, you can expand the ServerNet
Cluster icon to view information about the local system’s connectivity to other
nodes (systems) in the ServerNet cluster.
•
The view pane is located on the top right of the Management window. The view
pane includes a Physical view, Connection view, and Inventory view of a NonStop
S-series server.
•
The details pane is located on the bottom right of the window. It consists of an
Attributes tab and an Alarms tab. The Attributes tab lists the attribute name and
corresponding value of the group, module, or resource selected in the tree pane.
The Alarms tab lists the alarms for the resource selected in the tree pane.
The tree pane and view pane work together to demonstrate the relationship between
the physical location of a group, module, or resource, and its position in the hierarchy
of the NonStop S-series server.