NonStop S-Series Operations Guide (G06.29+)

Determining Your System Configuration
HP NonStop S-Series Operations Guide—522459-009
2-6
Locating System Components in an Enclosure
Table 2-2 lists slot numbers for each system component in a processor enclosure.
Table 2-2. Slot Numbers of System Components in a Processor Enclosure
Slot System Component
01-08 Disks
09-10 SCSI terminators
11-18 Disks
19-20 SCSI terminators
21-22 Power monitor and control unit (PMCU)
23 Battery
24 Group ID switch
25-26 Fans
27 Group ID switch
28 Battery
29-30 Reserved (Sxx000 and S7x00 servers only)
31-32 Power supply in NonStop Sxx000 and S7x00 servers. These slots are not
used in NonStop S7000 servers.
33-49 These slots do not exist.
50 Processor multifunction (PMF) CRU or PMF 2 CRU
51-52 Usually, these slots are reserved for ServerNet expansion boards (SEBs) or
for modular ServerNet expansion boards (MSEBs). Depending on the
topology of your system, however, other adapters might be located in one of
these slots.
53-54 ServerNet adapters. SEBs or MSEBs might be located in these slots,
depending on the topology of your system.
55 PMF CRU or PMF 2 CRU
56 Emergency power-off (EPO) connector