NonStop S-Series Planning and Configuration Guide (G06.25+)

Guide to Server Manuals
HP NonStop S-Series Planning and Configuration Guide—523303-015
E-16
Titles and Abstracts
LAN Configuration and
Management Manual
Describes how to configure, operate, and manage the
ServerNet LAN Systems Access (SLSA) subsystem on a
NonStop S-series server. Included are detailed
descriptions of the Subsystem Control Facility (SCF)
commands used with the SLSA subsystem and a quick-
reference section showing the command syntax. This
manual is written for anyone who is responsible for
configuring, managing, or monitoring the SLSA
subsystem on a NonStop S-series server.
Modular I/O Installation and
Configuration Guide
Provides instructions for installing the IOAM to connect
an ESS and an HP NonStop™ S-series server. It also
explains the architecture of the I/O adapter module
(IOAM) and the Enterprise Storage System (ESS) and
describes how to configure them both for fault tolerance.
N1524A ACL Installation and
User’s Guide
Describes how to install, operate and maintain the
N1525A ACL. This guide is written for those who install
or maintain the N1525A ACL tape drive.
N1524A ACL Installation and
User’s Guide for the NonStop S-
Series Tape Enclosure
Describes how to install, operate, and maintain the
N1525A ACL. The guide is written for installers, users,
and maintainers of the N1524A ACL in a NonStop S-
Series tape enclosure.
NonStop Cluster Switch
Firmware Notes
Describes firmware and configuration considerations for
NonStop cluster switches installed as new or
replacement units.
NonStop Cluster Switch
Hardware Installation and
Support Guide
Describes the installation and support of the ServerNet II
switch, uninterruptible power supply, and AC transfer
switch.
NonStop S-Series Central Office
Server Installation and Service
Guide
Describes how to install and service NonStop S-Series
Central Office (CO) server hardware. It includes
information about bolting cabinets to the floor for seismic
survival, cabling the enclosures, starting the system,
adding enclosures, and performing service tasks on the
server’s field-replaceable units (FRUs) and other
hardware components.
NonStop S-Series Hardware
Installation and FastPath Guide
Describes how to install and start a NonStop S-series
server for the first time. It includes information about
installing server hardware, cabling system enclosures,
installing and starting system consoles, installing external
system devices, starting the server, and configuring the
server after startup. This guide also includes a case
study of installing a sample system and a quick reference
to installing and configuring a two-processor or four-
processor NonStop S-series server in the Tetra 8
topology. This guide is written for anyone qualified to
install a NonStop S-series server.
Title Abstract (page 7 of 14)