NonStop S-Series Planning and Configuration Guide (G06.25+)

Guide to Server Manuals
HP NonStop S-Series Planning and Configuration Guide—523303-015
E-18
Titles and Abstracts
NonStop System Console
Installer Guide
Describes how to upgrade a system console (formerly
known as TSM workstation) running the Microsoft
Windows 2000 Professional or the Microsoft Windows
XP Professional operating system to the latest versions
of the system console applications delivered on the HP
NonStop System Console CD.
Open SCSI Integrator’s Manual
for NonStop S-Series Servers
Assists developers in designing devices for connection to
NonStop S-series servers through their SCSI-2 interface.
This manual describes the SCSI-2 protocol supported by
the processor multifunction (PMF) customer-replaceable
unit (CRU) and the I/O multifunction (IOMF) CRU,
provides information on developing interface software,
and describes the use of maintenance, diagnostic, and
configuration software.
Open System Services
Installation Guide
Explains how to install and configure the NonStop Open
System Services (OSS) environment. It assumes that the
correct version of the operating system has already been
installed. It also assumes that the reader is an
experienced operator or system manager for NonStop
systems.
Operator Messages Manual Describes all messages that are distributed by the Event
Management Service (EMS). This manual provides an
explanation of the cause of each message, discussion of
its effects on the system, and suggestions for corrective
action.
OSM Migration Guide Describes how to prepare for migration from TSM to
OSM including: comparison of OSM and TSM software,
hardware products for which OSM is required,
workstation hardware and software requirements for
using OSM, coexistence and fallback issues, and how to
migrate an existing TSM system list for OSM use.
OSM Online Help Provides online help from within each of these OSM
applications:
•
OSM Low-Level Link
•
OSM Notification Director
•
OSM Event Viewer
•
Individual OSM guided procedures (which are
launched by OSM Service Connection actions)
OSM User’s Guide Provides an overview of all OSM applications and
components. Describes how to configure and get started
with OSM, and how to use the primary OSM interface,
the OSM Service Connection, to monitor and perform
actions on system and cluster resources. This guide is
also available as online help from within the OSM
Service Connection.
Title Abstract (page 9 of 14)