NonStop S-Series Planning and Configuration Guide (G06.26+)

Initial Configurations

HP NonStop S-Series Planning and Configuration Guide—523303-017

8-16

ServerNet Adapter Configurations

Any ServerNet adapters that are ordered with a system are configured at the factory

and named using default names that include the adapter type. Subordinate objects

associated with the ServerNet adapters, such as logical interface (LIF) names, are also

given default names. After you install and start your system, use SCF to determine the

factory-default configuration for your ServerNet adapters and their associated objects.

Refer to the SCF Reference Manual for G-Series RVUs and to the LAN Configuration

and Management Manual for more information about this task.

Factory-Default Configuration of MFIOBs

The multifunction I/O boards (MFIOBs) in the PMF CRUs in group 01 contain

ServerNet adapters that are configured at the factory as described here. The MFIOBs

in the other groups are not configured.

PMF CRU

Location

(Group,

Module,

Slot)

Adapter

Type

Adapter

Name

SAC

Name

Access List

(Processor

Numbers) PIF Name LIF Name

(01,01,50) MIOE MIOE0 MIOE0.0 0,1 MIOE0.0.A LANX

(01,01,55) MIOE MIOE1 MIOE1.0 1,0 MIOE1.0.A LANY