NonStop S-Series Planning and Configuration Guide (G06.26+)

Safety and Compliance
HP NonStop S-Series Planning and Configuration Guide—523303-017
Statements-6
GENERAL PRECAUTIONS
Verify that the AC power supply branch circuit that provides power to the rack is
not overloaded. This will reduce the risk of personal injury, fire, or damage to the
equipment.
The total rack load should not exceed 80 percent of the branch circuit
rating. Consult the electrical authority having jurisdiction over your facility for
installation requirements.
If the product sustains damage requiring service, disconnect the product from
the AC electrical outlet and refer servicing to a HP authorized service provider.
Examples of damage requiring service include:
•
The power cord, extension cord or plug has been damaged.
•
Liquid has been spilled on the product.
•
The product has been exposed to rain or water.
To reduce the risk of electric shock or damage to the equipment when maintaining or
servicing PDU, observe the following precautions:
•
Disconnect all power supply cords from the source. Remove all watches, rings, or
loose jewelry when working in hot-plug areas of an energized system.
•
Never use the product in a wet location. Avoid inserting foreign objects through
openings in the product.