NonStop S-Series Planning and Configuration Guide (G06.29+)

System Components
HP NonStop S-Series Planning and Configuration Guide—523303-021
4-10
Group ID Switches
Group ID Switches
Two group ID switches are located in slots 24 and 27.
The settings of the group ID switches define the group number of that enclosure:
•
Both group ID switches within an enclosure must show the same group number.
•
The group number of each enclosure in your system must be unique.
Changing the Group Number
•
The group number of an enclosure cannot be changed online. The group number
is read only at the time the enclosure is powered on.
•
After a group number is assigned to an enclosure, it is strongly recommended that
you do not change it unless as part of a well planned reconfiguration of the system.
•
If you change the group number on the group ID switches of an enclosure, you
must also change all the group ID labels to match the new group number:
°
On the appearance side: on the enclosure door behind the faceplate
°
On the service side: on the leftmost cable support and on the service-side
door, if present
VST603.vsd
10
Group ID
Switch