NonStop S-Series Planning and Configuration Guide (G06.29+)

System Components
HP NonStop S-Series Planning and Configuration Guide—523303-021
4-29
Slot Assignments for Slots 51 Through 54
Slot Assignments for NonStop S-Series Servers
Topology Enclosure Hardware Slots Notes
Tetra 8 Processor SEBs or
MSEBs
51, 52 You form an inner
tetrahedron using these
SEBs or MSEBs. You can
attach two I/O enclosures
to these SEBs or MSEBs.
ServerNet
adapters
53, 54
I/O ServerNet
adapters
51, 52, 53, 54
IOAM FCSA
G4SA
2.1, 2.2, 2.3, 2.4, 2.5
3.1, 3.2, 3.3, 3.4, 3.5
Slots are numbered
according to their module
numbers.
Tetra 16 Processor,
inner
tetrahedron
SEBs or
MSEBs
51, 52, 53, 54 To connect processor
enclosures:
•
You form an inner
tetrahedron using the
SEBs or MSEBs in
slots 51 and 52.
•
You form an outer
tetrahedron using port
5 of the SEBs or
MSEBs in slots 51 and
52.
•
You can attach five I/O
enclosures to SEBs or
MSEBs in slots 53 and
54.
ServerNet
adapters
53, 54 If no SEBs or MSEBs are
present.
Processor,
outer
tetrahedron
SEBs or
MSEBs
51, 52 You can attach four I/O
enclosures to these SEBs
or MSEBs.
ServerNet
adapters
53, 54
I/O ServerNet
adapters
51, 52, 53, 54
IOAM FCSA
G4SA
2.1, 2.2, 2.3, 2.4, 2.5
3.1, 3.2, 3.3, 3.4, 3.5
Slots are numbered
according to their module
numbers.