NonStop S-Series Planning and Configuration Guide (G06.29+)
System Components
HP NonStop S-Series Planning and Configuration Guide—523303-021
4-48
Configurations of Memory Units
ServerNet Router 2
The PMF 2 CRU contains a ServerNet router 2, which has connections to:
•
The processor in the same PMF CRU
•
The processor in the other PMF CRU in this enclosure
•
Both SEB or adapter slots 51 and 52
•
Both SEB or adapter slots 53 and 54
•
Three ServerNet ports, through plug-in cards (PICs)
•
The peripheral component interconnect (PCI) bus on the MFIOB to two SCSI
controllers for the internal disk drive buses
•
The native I/O bus (NIOBus) on the MFIOB to:
°
A service processor (SP)
°
An Ethernet port
°
An auxiliary port
°
The other ports on the PMF CRU faceplate
°
The SMB
Power Board
The power board in a PMF CRU supplies power to the components within that PMF
CRU. In the S7000 PMF CRU, power supplies reside on the power board. In S7400,
S7600, S7800, S7800B, and Sxx000 PMF CRUs, the power board receives DC power
from the power supplies in the power shelf and conditions the power before distributing
it to the other components.
The pair of PMF CRUs within an enclosure also supplies redundant power to the
following devices within that enclosure:
•
Disk drives
•
SCSI terminators
•
SEBs
•
ServerNet adapters