NonStop S-Series Planning and Configuration Guide (G06.29+)

HP NonStop S-Series Planning and Configuration Guide—523303-021
xxi
About This Guide
This section offers a general overview of this guide, describes this guide’s intended
audience, and explains the contents of each section of this guide.
Who Should Use This Guide
This guide is written for those who are responsible for planning the installation,
configuration, and maintenance of the server and the software environment at a
particular site.
Those who perform the hardware tasks documented in this guide must have completed
HP training courses on system support for NonStop S-series servers.
What’s in This Guide
This guide is divided into these parts:
Where to Get More Information
For information about NonStop S-series hardware, software, and operations, refer to
Appendix E, Guide to Server Manuals.
Note. NonStop S-series and NonStop K-series refer to hardware systems; G-series and
D-series refer to system software.
•
G-series software runs on NonStop S-series servers.
•
D-series software runs on NonStop K-series servers.
Part I, Reference Information
This part provides information about the organization,
physical arrangement, and configurations that are possible
with the servers. The information is descriptive rather than
task oriented.
Part II, Planning Tasks
This part provides information about planning and
preparing your site for the installation of system hardware.
Part III, Appendixes
These appendixes provide:
Information about part numbers for all CRUs
System specifications
Blank system installation forms
Examples of how to plan, cable, and configure systems
Lists of core hardware manuals and online help for
NonStop S-series servers
Information about supported hardware and configurations
Modular power information