NonStop S-Series Planning and Configuration Guide (G06.29+)

The Planning and Configuration Process
HP NonStop S-Series Planning and Configuration Guide—523303-021
9-14
Adding a ServerNet Adapter
Adding a ServerNet Adapter
The supported ServerNet adapters are listed in the Interactive Upgrade Guide 2.
1. Complete or modify the following forms for the installer:
•
Installation Document Checklist.
•
System Equipment Inventory Form. List only the ServerNet adapter that is
being added to the system.
•
System Enclosure Checklist. Show where in the enclosure the adapter is to be
installed.
•
Preinstalled I/O Device Cable Checklist. Complete this form only if you are
connecting this adapter to preinstalled cables.
•
Configuration forms, if any, for the adapter. Refer to the manual that describes
the adapter for the configuration forms.
2. Install the ServerNet adapter as described in the manual for that adapter.
ServerNet adapters can be added to a system online.
3. Add the ServerNet adapter to the system configuration database as described in
the manual for that adapter. For example, the LAN Configuration and Management
Manual describes how to add an E4SA to the system configuration.
4. Test the new system configuration.
5. Modify your startup and shutdown files to include the added ServerNet adapter.
Startup and shutdown files are described in Startup and Shutdown Files on
page 15-10.
Changing the System Configuration of a ServerNet Adapter
For information about changing the configuration of a ServerNet adapter, refer to the
manual that describes that ServerNet adapter and the software associated with it.